- Battery Chargers (45) +-
- CTs, VTs and Shunts (52) +-
- DC UPS (63) +-
-
Earth Leakage Relays (149)
+-
- MULTICHANNEL - COMBI 6 - Type B, A&F, A F & B - Earth Leakage Relays - X52U... & X72U... Series (44)
- ANALOGUE EARTH LEAKAGE RELAYS - TYPE A : DSA & DSX Series (35)
- DIGITAL EARTH LEAKAGE RELAYS - Type A-F - TRMS: X35DL3, X48DL3, X72DL4 Series (9)
- DIGITAL EARTH LEAKAGE RELAYS - Type B: X35DB3, X48DB3, X72DB4... Series (25)
- Sensors for Type B ELRs (12)
- Core & Split Core Balanced CTs for Type A and A-F ELRs (16)
- Adaptor Transformers for Type A and A-F ELRs (4)
- Flux Concentrators (3)
- Residual Direct Current Monitoring Module (RDC-M-module) (1)
- Energy Meters (7)
- Filter/Roof Fans, Heaters, A.C. & Thermostats (157) +-
- Genset Controllers (15) +-
- Industrial Kitchen Controllers (2)
- Instrumentation (62) +-
- Multifunction Meters (34) +-
- Power Supplies (18)
- Process & PID Controllers (7)
- Protection: Mains/Temperature Relays (62) +-
- Transducers (30) +-
Loss of Mains relay compliant to G99 & G98. Fully Type tested by Bureau Veritas. On the ENA data base and widely used in the UK and Ireland markets - Ordering Code S222296
The UFR1001E monitors under and over voltage and for under and over frequency and ROCOF (df/dt, rate of change of frequency). Limits and response times can be easily set in wide ranges.
The unit comes with 4 preset programs with values defined as per G99/98. You can adjust to suit local network conditions and then seal to prevent tampering.
The UFR1001E Is compliant to the following Grid connection codes:
Certificate of compliance G99 amendment 6
Certificate of compliance G98
Certificate of compliance G59/3 Amendment 4
Certificate of compliance G83/2:2012
Konformitätsnachweis NA-Schutz VDE-AR-N 4105 "Eigenerzeugungsanlagen am Niederspannungsnetz
Konformitätsnachweis NA-Schutz bdew-Richtlinie "Eigenerzeugungsanlagen am Mittelspannungsnetz"
DIN V VDE 0126-1-1
ÖVE/ÖNORM E 8001-4-712:2009-12, Anhang A
DIN V VDE 0126-1-1, VFR2013/VFR 2014
NRS 097-2-1:2010 ed1.0 South Africa
Approved Synergrid C10/C11
Approved Energex RED STD00233
Accepted by Tepco
User selectable preset programs for different grid codes allow installation plug & play.
Further information:








